Kubota V3300-DI-B, V3300-DI-TB, V3300-DI-E2B, V3300-DI-T-E2B Engine Inframe Overhaul Rebuild Kit

V3300-DI-B, V3300-DI-TB, V3300-DI-E2B, V3300-DI-T-E2BDirect Injection
Pencil fuel injectorBore: 3.858 in / 98 mm
Stroke: 4.331 in / 110 mmBobcat: A300, S220, S250, S300, T250, T300Engine Overhaul Kit Includes
(4) Piston & Ring Kit
(5) Main Bearings
(1) Front Crankshaft Bushing
(4) Connecting Rod Bearings
(1) Front Crankshaft Seal
(1) Rear Crankshaft Seal
(1) Thrust Washer
(1) Head Gasket Set *Please note - Head Gasket not included in set - See note below
(1) Lower Gasket Set
(4) Piston Pin Bushing*Note regarding head gasket: Kubota used three different thickness head gaskets when building this engine. As a result, a head gasket will not be included with your kit. It is important that you determine the proper thickness head gasket for your engine and proceed accordingly. They are sold separately, but we only offer the most common, 2-notch gasket (.80mm thickness) There is a chance you may need either a 1-notch (.90mm thickness) or 0-notch (.95mm thickness) which are only available through a Kubota dealer. Unfortunately we do not offer those two sizes. The part number for the .90mm through the dealer is 1C020-03602 and the part number for the .95mm is 1C020-03612.